Adhesive Ground Coat

A one-component polymer-modified cement-based binder used as an adhesive, base coat, and surface leveler. Use it on masonry and concrete, gypsum sheathing, cement board, existing stucco, wood sheathing, and as a reinforcing-mesh ground coat and as a leveler.

A 100% acrylic-based adhesive, base coat, and surface leveler. Use PrimaCoat™ on masonry and concrete, gypsum sheathing, cement board, existing stucco, and as a reinforcing-mesh ground coat and as a leveler. PrimaCoat™ is polymer modified for long-term durability.

SonoWall(TM) FT

A flexible, cementitious waterproofing membrane, SonoWall(TM) FT can be used over plywood, gypsum, cement sheathing, concrete, stucco and masonry. Easily applied by trowel, it bridges cracks, hides defects, and handles substrate movement. Its breathable formula resists delamination, and low VOCs make it an environmentally friendly choice.

Cement-based fiber-reinforced one-step base coat. StuccoBase™ is used on concrete and masonry and existing stucco, over stucco wire and metal lath, and for leveling irregular surfaces.

StuccoBond(TM)

StuccoBond(TM) is a bonding agent/additive for Stuccobase(TM) cement-based stucco base coat. It provides increased performance for Portland cement plasters, scratch coats, brown coats, or on-site mixed stucco bases. Its low-odor, low-toxicity, VOC-compliant formula is environmentally friendly. It can be applied with brush, roller, or sprayer, and cleans up easily with water.

A waterproof elastomeric stucco coating, StuccoLast(TM) Coat may be used on existing stucco, or as a topcoat over a stucco base coat. StuccoLast(TM) Coat is elastomeric, and provides superior resistance to weather extremes, fungus and mildew. It protects building interiors from moisture damage, and forms a tight, permanent bond to substrates. Available in a wide choice of attractive colors.

StuccoLast™

Textured elastomeric acrylic finish coat. This 100% acrylic polymer with marble aggregate is used over stucco, masonry, acrylic finishes, foam installations, and Sonowall™ base coats. StuccoLast™ has excellent flexibility, especially at low temperatures. StuccoLast™ resists wind-driven rain. It is available in 25 standard colors. VOC compliant.

A resin-coated, fiberglass construction reinforcement fabric, StuccoMesh(TM) is used on EIFS finish systems and in fire proofing fabric. StuccoMesh(TM) is flexible, conforming easily to building contours. It has a high tensile strength, ideal for heavy-duty reinforcement of details and stucco repairs.

StuccoPatch

A non-sag, cement-based repair mortar for stucco, StuccoPatch is used for filling small cracks and defects, patching and leveling of vertical and overhead surfaces, and preparing damaged walls before application of finishes or acrylic coatings. It can be applied in lifts up to 2” thick, and fills deep gouges and voids. It protects reinforcing steel from corrosion and its polymer-modified formulation provides improved adhesion to substrates and increased freeze-thaw resistance.

An acrylic-based surface sealer and primer, StuccoPrime(TM) is used over cementitious ground coats and over concrete, masonry, or plaster before the application of Sonowall(TM) finishes. StuccoPrime(TM) improves color uniformity and adhesion of Sonowall(TM) products. It has low VOCs, low odor, and cleans up easily with water.

StuccoSil(TM) Coat

A 100% acrylic silicone-modified waterproof elastomeric coating, StuccoSil(TM) Coat may be used over existing stucco, or as a topcoat over a stucco base coat, interior or exterior. It is highly UV and weather resistant, providing excellent color retention and resistance to chalking. It provides low temperature flexibility and stretchability, and has low VOCs and low odor.

Textured elastomeric silicone-enhanced acrylic finish coat with marble aggregate. Use StuccoSil™ over stucco, masonry, acrylic finishes, foam installations, and Sonowall™ base coats. StuccoSilÆs high-performance properties include crack-bridging, cold-temperature flexibility, water resistance, water-vapor permeability, and long-term retention of elasticity. It is available in 25 standard colors. It is VOC compliant.

StuccoTex(TM)

Textured acrylic finish coat. This 100% acrylic polymer with marble aggregate is used over stucco, masonry, acrylic finishes, foam installations, and Sonowall(TM) base coats. StuccoTex(TM) makes a durable, flexible wall finish resistant to wind-driven rain. It is available in 25 standard colors. StuccoTex(TM) is VOC compliant.

A 100% acrylic stucco coating, StuccoTex(TM) Coat may be used over existing stucco, or as a topcoat over a stucco base coat, interior or exterior. StuccoTex(TM) Coat remains flexible and resistant to weather extremes, mildew and fungus. It requires only one coat on most installations, and easily cleans up with water. Available in a wide choice of attractive colors.

For further information on any of the above products you can visit the manufacturers website.